"John Deere 1050 C Must Sell " New Motor/ Complete U/C 90 % Start Price USD 162,000.00 Current Price USD 162,000.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Friday, November 14, 2008 End Time Monday, November 24, 2008 Location Highland, CA See more about '"John Deere 1050 C Must Sell "' Description This machine is in great condition it was used to push wood chips its whole life.The 1050C has new motor at 5,000 hours current hours 6,200. The undercarriage is 90% the machine is super tight because all it did was push wood chips in a lumber mill. I turned it into a dirt dozer with ripper and blade. The blade will have AR 400 side plate's put on b-4 transporting the blade is an AR 400 dirt blade and all cutting edges are factory spec size. Cab A/C just re-painted.Serviced every 250 hours nice machine. Slow on work and need to sale. Transport will be buyers responsibilty. I can get quotes on transport if needed. Any questions at all just call Nick 909-917-5093. I attached a detailed spec list from John Deere MANUFACTURER John Deere MODEL 1050C ENGINE      Manufacturer/Model Liebherr / D946 L A6      Net Horsepower @ Rated rpm 335 (250) @ 1800      # Cylinders and Displacement cu in. (L) 6 - 733 (12.0)      Maximum Torque lb ft Not published TRANSMISSION      Type Hydrostatic      Speed Ranges Infinite           Forward 6.8 (10.9)           Reverse 6.8 (10.9) FINAL DRIVES Double reduction w/ planetary STEERING Dual-path HS w/ctr rotation HYDRAULIC SYSTEM      Pump Type Variable axial-piston      Pump flow gpm (L/min.) 68 (257)      System Pressure psi (kPa) 3700 (25490) UNDERCARRIAGE      Track Gauge in.(mm) 86" (2180)      Length of Track on Ground in. (mm) 125" (3180)      Std. Grouser in. (mm) 28"      Ground Contact Area sq in. (cm²) 5,512 (35560)      Ground Pressure psi (kPa) 14.2 (97.8)      No. of Track Rollers 7      Track Pitch in. (mm) 8.5" (220)      Track Shoes each side 44      Track Oscillation in. (mm) 13" (330) DOZER      Blade Width in. (mm) 159" (4040)      Blade Height in. (mm) 75"      SAE Blade Capacity cu yd (m³) 11.6 (8.87)      Blade Lift Height in. (mm) 55" (1400)      Digging Depth in. (mm) 22" (559)      Blade width at Full Angle in. (mm) 159" (4040)      Blade Tilt in. (mm) 38" (965) DIMENSIONS      Height w/ROPS in. (mm) 143" (3630)      Length w/Dozer in. (mm) 256" (6500)      Ground Clearance in. (mm) 25" (635) CAPACITIES      Fuel Tank gal (L) 172 (651)      Hydraulic Reservoir gal (L) 55.5 (210.1) SAE OPERATING WEIGHT LB (KG) 77,843 (35310) Place a Bid!